Basic Input Output System/Konfiguration 2008.08.02 kanzler: Unterschied zwischen den Versionen

Aus Mikiwiki
Zur Navigation springen Zur Suche springen
Keine Bearbeitungszusammenfassung
Keine Bearbeitungszusammenfassung
 
Zeile 9: Zeile 9:
* Third IDE Master: SAMSUNG HD502IJ
* Third IDE Master: SAMSUNG HD502IJ
* Fourth IDE Master: SAMSUNG HD502IJ  
* Fourth IDE Master: SAMSUNG HD502IJ  
* Floppy Drive A: Not Installed


<b>Advanced BIOS Features</b>
<b>Advanced BIOS Features</b>
Zeile 38: Zeile 39:
*** Precharge Delay: 6 Clocks
*** Precharge Delay: 6 Clocks
*** Burst Length: 8
*** Burst Length: 8
* AGP Aperture Size: 64 MB
* AGP Aperture Size: 128 MB


<b>Power Management Features</b>
<b>Power Management Features</b>
Zeile 87: Zeile 88:
* AC'97 Audio: Disabled
* AC'97 Audio: Disabled
* Set Super I/O
* Set Super I/O
** OnBoard FDC: Auto
** OnBoard FDC: Disabled
** OnBoard Serial Port A: Auto
** OnBoard Serial Port A: Disabled
** OnBoard Parallel Port: Auto
** OnBoard Parallel Port: 378
*** Parallel Port Mode: Normal
*** Parallel Port Mode: EPP
*** EPP Version: N/A
*** EPP Version: 1.9
*** Parallel Port IRQ: Auto
*** Parallel Port IRQ: 7
*** Parallel Port DMA Channel: N/A
*** Parallel Port DMA Channel: N/A



Aktuelle Version vom 28. Juli 2009, 11:47 Uhr

Der Rechner "kanzler" enthält eine Hauptplatine MSI 865PE Neo2-V mit einem AMIBIOS V6.1 (im Setup-Programm heisst es "3.31a"). Die dort gemachten Einstellungen sind die folgenden (Stand: 28. Juli 2009).

Released: 01/05/2005 - AMIBIOS (C)2003 American Megatrends Inc - A6788IMS V6.1 010505

(C) American Megatrends Inc. - 63-6100-001169-00101111-040201-I865G-1I865XXX-

Standard CMOS Features

  • Primary IDE Master: LITE-ON DVDRW SOHW
  • Third IDE Master: SAMSUNG HD502IJ
  • Fourth IDE Master: SAMSUNG HD502IJ
  • Floppy Drive A: Not Installed

Advanced BIOS Features

  • Quick Boot: Enabled
    • Boot Device Select
      • Boot Device Priority
        • 1st: IDE-0:SAMSUNG HD502IJ
        • 2nd: CD/DVD-0:LITE-ON DVDRW SOHW-1693S
        • 3rd: Disabled
  • Full Screen LOGO Show: Disabled
  • S.M.A.R.T. for Hard Disks: Disabled
  • BootUp Num-Lock: On
  • Floppy Drive Seek: Disabled
  • Password Check: Setup
  • Boot To /OS/2: No
  • MPS Revision: 1.4
  • APIC ACPI SCI IRQ: Disabled
  • CPU L1 & L2 Cache: Enabled
  • System BIOS Cacheable: Enabled
  • C000,32k Shadow: Cached
  • Set Limit CPUID MaxVal to 3: Disabled

Advanced Chipset Features

  • DRAM Timing Setting
    • Configure DRAM Timing by SPD: Disabled
      • CAS# Latency: 2 Clocks
      • RAS# Precharge: 3 Clocks
      • RAS# to CAS# Delay: 3 Clocks
      • Precharge Delay: 6 Clocks
      • Burst Length: 8
  • AGP Aperture Size: 128 MB

Power Management Features

  • ACPI Standby State: S1/POS
  • Re-Call VGA BIOS at S3 Resuming: Disabled
  • Power Management/APM: Disabled
  • Suspend Time Out (Minute): Disabled
  • Power Button Function: On/Off
  • Restore on AC/Power Loss: Power Off
  • Set Monitor Events ...
    • FDC/LPT/COM Ports: Monitor
    • Primary Master IDE: Monitor
    • Primary Slave IDE: Ignore
    • Secondary Master IDE: Monitor
    • Secondary Slave IDE: Ignore
  • Set Wake Up Events ...
    • USB Device Wakeup From S3: Disabled
    • Keyboard PowerOn Function: Disabled
      • Specific Key for PowerOn: N/A
    • Mouse PowerOn Function: Disabled
    • Resume on PME#: Disabled
    • Resume on RTC Alarm: Disabled
    • RTC Alarm Date: 15
    • RTC Alaram Date: 12
    • RC ALARM Minute: 30
    • RC ALARM Second: 30

PNP/PCI Configurations

  • Clear NVRAM: No
  • PCI Latency Timer (PCI Clocks): 32
  • Init. Graphics Adapter Priority: AGP/PCI
  • PCI IDE BusMaster: Disabled
  • Set IRQs to PCI or ISA (alle: PCI/PnP)
  • Set DMAs to PnP or ISA (alle: PnP)

Integrated Peripherals

  • USB Controller: Enabled
  • USB Device Legacy Support: Disabled
  • On-Chip IDE Configuration
    • On-Chip ATA)s) Operate Mode: Native Mode
      • ATA Configuration: P-ATA + S-ATA
      • S-ATA Keep Enabled: Yes
      • P-ATA Keep Enabled: Yes
        • P-ATA Channel selection: Both
      • Combined Mode Option: P-ATA 1st Channel
      • S-ATA Ports Definition: P0-3rd./P1-4th.
  • OnBoard LAN: Enabled
  • AC'97 Audio: Disabled
  • Set Super I/O
    • OnBoard FDC: Disabled
    • OnBoard Serial Port A: Disabled
    • OnBoard Parallel Port: 378
      • Parallel Port Mode: EPP
      • EPP Version: 1.9
      • Parallel Port IRQ: 7
      • Parallel Port DMA Channel: N/A

PC Health Status

  • CPU Temperature: 66°C
  • System Temperature: 49°C
  • CPU Fan Speed: 2556 RPM
  • System Fan Speed: 0 RPM
  • Vcore: 1.33904V
    • 3.3 V: 3.296V
    • + 5.0V: 5.085V
  • Battery: 2.912V
    • +5V SB: 5.013V

Frequency/Voltage Control

  • Dynamic OverClocking: Disabled
  • Performance Mode: Normal
  • CPU Ratio Selection: Locked
  • DRAM Frequency: Auto
  • Spread Spectrum: Enabled
  • Adjust CPU Bus Clock (Mhz): 133
  • Adjust AGP/PCI Clock (Mhz): 66.66/33.33
  • CPU Vcore Adjust: No
    • CPU Vcore: 1.3750V
  • DDR Power Voltage: 2.60V
  • AGP Power Voltage: 1.55V