Plextor Convertx PX-M402U: Unterschied zwischen den Versionen

Aus Mikiwiki
Zur Navigation springen Zur Suche springen
Keine Bearbeitungszusammenfassung
Zeile 8: Zeile 8:
== Installation ==
== Installation ==


=== Ubuntu 8.04 Hardy Heron ===
=== Ubuntu 8.04 Hardy Heron (Linux 2.6.24-24) ===


Herunterladen:  
Herunterladen: http://nikosapi.org/wiki/index.php/WIS_Go7007_Linux_driver
* http://nikosapi.org/wiki/index.php/WIS_Go7007_Linux_driver
* http://home.comcast.net/~bender647/go7007/


Installation der benötigten Entwicklungspakete.
Installation der benötigten Entwicklungspakete.


  $ <b>sudo apt-get install linux-headers-generic fxload libncurses5-dev</b>
  $ <b>sudo apt-get install linux-headers-generic fxload libncurses5-dev</b>
$ <b>sudo apt-get install linux-headers-lum-2.6.24-24-generic</b>


Zuerst wird die Datei "wis-go7007-linux-0.9.8-2.tar.bz2" sowie drei für Linux >= 2.6.24 passende Patches heruntergeladen.
Entfernen der inkorrekten Sound-Kernelheader.


  $ <b><nowiki>wget http://nikosapi.org/software/WIS_Go7007/wis-go7007-linux-0.9.8-2.tar.bz2</nowiki></b>
  $ <b>sudo mv /usr/src/linux-headers-2.6.24-24-generic/include/sound \
$ <b><nowiki>wget http://home.comcast.net/~bender647/go7007/wis-go7007-updates.diff</nowiki></b>
    /usr/src/linux-headers-2.6.24-24-generic/include/sound-BACKUP20090812</b>
$ <b><nowiki>wget http://home.comcast.net/~bender647/go7007/wis-go7007-2.6.21-typdefs.diff</nowiki></b>
$ <b><nowiki>wget http://home.comcast.net/~bender647/go7007/wis-go7007-2.6.24-no_algo_control.diff</nowiki></b>


Entpacken der Quelldatei, Kompilieren und Installieren.
Herunterladen der Datei "wis-go7007-linux-0.9.8-2.tar.bz2", welche bereits einige notwendige Patches enthält.


$ <b>mkdir Plextor && cd Plextor</b>
$ <b><nowiki>wget http://nikosapi.org/software/WIS_Go7007/wis-go7007-linux-0.9.8-2.tar.bz2</nowiki></b>
  $ <b>tar xjf wis-go7007-linux-0.9.8-2.tar.bz2</b>
  $ <b>tar xjf wis-go7007-linux-0.9.8-2.tar.bz2</b>
  $ <b>cd wis-go7007-linux-0.9.8-2</b>
  $ <b>cd wis-go7007-linux-0.9.8-2</b>
In den wis-go7007-Quelldateien muss folgende Zeile am Anfang der Datei "Makefile" eingefügt werden, damit der richtige LUM ALSA-Header berücksichtigt wird.
$ <b>vi kernel/Makefile</b>
EXTRA_CFLAGS += -I /usr/src/linux-headers-lum-2.6.24-24-generic -include sound/config.h
Kompilieren und Installieren.
  $ <b>make</b>
  $ <b>make</b>
***** Using kernel source in /usr/src/linux-headers-2.6.24-24-generic *****
make modules -C /usr/src/linux-headers-2.6.24-24-generic M=/home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel
make[1]: Betrete Verzeichnis '/usr/src/linux-headers-2.6.24-24-generic'
  CC [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/go7007-v4l2.o
  CC [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/go7007-driver.o
  CC [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/go7007-i2c.o
  CC [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/go7007-fw.o
  LD [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/go7007.o
  CC [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/go7007-usb.o
  CC [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/snd-go7007.o
In Datei, eingefügt von /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/snd-go7007.c:39:
/usr/src/linux-headers-lum-2.6.24-24-generic/sound/driver.h:1:2: Warnung: #warning "This file is deprecated"
In Datei, eingefügt von /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/snd-go7007.c:39:
/usr/src/linux-headers-lum-2.6.24-24-generic/sound/driver.h:1:2: Warnung: #warning "This file is deprecated"
  CC [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-saa7115.o
  CC [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-tw9903.o
  CC [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-uda1342.o
  CC [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-sony-tuner.o
  CC [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-saa7113.o
  CC [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-ov7640.o
  CC [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-tw2804.o
  Building modules, stage 2.
  MODPOST 10 modules
WARNING: "snd_pcm_period_elapsed" [/home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/snd-go7007.ko] undefined!
WARNING: "snd_card_disconnect" [/home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/snd-go7007.ko] undefined!
WARNING: "snd_device_new" [/home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/snd-go7007.ko] undefined!
WARNING: "snd_pcm_set_ops" [/home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/snd-go7007.ko] undefined!
WARNING: "snd_card_free_when_closed" [/home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/snd-go7007.ko] undefined!
WARNING: "snd_pcm_lib_ioctl" [/home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/snd-go7007.ko] undefined!
WARNING: "snd_card_new" [/home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/snd-go7007.ko] undefined!
WARNING: "snd_card_free" [/home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/snd-go7007.ko] undefined!
WARNING: "snd_card_register" [/home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/snd-go7007.ko] undefined!
WARNING: "snd_pcm_new" [/home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/snd-go7007.ko] undefined!
  CC      /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/go7007-usb.mod.o
  LD [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/go7007-usb.ko
  CC      /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/go7007.mod.o
  LD [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/go7007.ko
  CC      /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/snd-go7007.mod.o
  LD [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/snd-go7007.ko
  CC      /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-ov7640.mod.o
  LD [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-ov7640.ko
  CC      /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-saa7113.mod.o
  LD [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-saa7113.ko
  CC      /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-saa7115.mod.o
  LD [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-saa7115.ko
  CC      /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-sony-tuner.mod.o
  LD [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-sony-tuner.ko
  CC      /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-tw2804.mod.o
  LD [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-tw2804.ko
  CC      /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-tw9903.mod.o
  LD [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-tw9903.ko
  CC      /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-uda1342.mod.o
  LD [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-uda1342.ko
make[1]: Verlasse Verzeichnis '/usr/src/linux-headers-2.6.24-24-generic'
sed -e s/@FIRMWARE_DIR@/\\/lib\\/firmware/ \
                        -e s/@FXLOAD@/\\/sbin\\/fxload/ \
                <hotplug/wis-ezusb.in >hotplug/wis-ezusb
sed -e s/@FIRMWARE_DIR@/\\/lib\\/firmware/ \
                        -e s/@FXLOAD@/\\/sbin\\/fxload/ \
                <udev/go7007_firmware_load.in >udev/go7007_firmware_load
sed -e s/@DESTDIR@// <udev/91-wis-ezusb.rules.in >udev/91-wis-ezusb.rules
make -C apps CFLAGS="-I/usr/src/linux-headers-2.6.24-24-generic/include -I../include"
make[1]: Betrete Verzeichnis '/home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/apps'
gcc -Wall -I/usr/src/linux-headers-2.6.24-24-generic/include -I../include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -o gorecord gorecord.c tv-freq.c
gcc -Wall -I/usr/src/linux-headers-2.6.24-24-generic/include -I../include -o modet modet.c -lncurses
make[1]: Verlasse Verzeichnis '/home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/apps'
  $ <b>sudo make install</b>
  $ <b>sudo make install</b>
Damit fxload die Firmware ins Gerät laden kann, muss usbfs (oder usbdevfs) nach "/proc/bus/usb" eingehängt werden. Dazu muss die Datei "/etc/init.d/mountdevsubfs.sh" angepasst werden. Dafür gibt es einen einfachen Patch, der im neuesten Treiberpaket enthalten ist.
$ <b>cp /etc/init.d/mountdevsubfs.sh ~/Desktop/</b>
$ <b>cd wis-go7007-linux-0.9.8-2</b>
$ <b>wd=`pwd`; sudo patch -d /etc/init.d -p0 -i "$wd"/patches/mountdevsubfs.sh-usbfs.patch</b>
$ <b>sudo /etc/init.d/mountdevsubfs.sh start</b>


== Weblinks ==
== Weblinks ==

Version vom 12. August 2009, 12:11 Uhr

Plextor Convertx PX-M402U (auch: Plextor ConvertX PX-M402U)


Der WIS Go7007 MPEG-4 Encoderchip ist in vielen Videoencodergeräten enthalten, darunter Plextor Convertx PX-M402U. Dieser Chip wird von Linux vollständig unterstützt, sofern der passende Treiber vorhanden ist. Eine Liste der unterstützten Geräte kann unter http://oss.wischip.com/ gefunden werden (inzwischen zeigt der URL allerdings ins Nirwana).

Leider hat WIS den Treiber schon länger nicht mehr aktualisiert, weswegen er auf den meisten modernen Linux-Distributionen nicht funktioniert. Einige nette Programmierer haben deswegen passende Patches geschrieben, sodass die wis-go7007-linux-0.9.8-Quelldateien auch unter Fedora Core 5/6, Fedora 7/8/9 und Ubuntu Dapper/Edgy/Feisty/Gutsy/Hardy funktionieren. Auch das Programm gorecord kann mit einem audio/video Sync-Patch nun Videodateien grösser als 1 GB aufnehmen.

Installation

Ubuntu 8.04 Hardy Heron (Linux 2.6.24-24)

Herunterladen: http://nikosapi.org/wiki/index.php/WIS_Go7007_Linux_driver

Installation der benötigten Entwicklungspakete. 

$ sudo apt-get install linux-headers-generic fxload libncurses5-dev
$ sudo apt-get install linux-headers-lum-2.6.24-24-generic

Entfernen der inkorrekten Sound-Kernelheader. 

$ sudo mv /usr/src/linux-headers-2.6.24-24-generic/include/sound \
    /usr/src/linux-headers-2.6.24-24-generic/include/sound-BACKUP20090812

Herunterladen der Datei "wis-go7007-linux-0.9.8-2.tar.bz2", welche bereits einige notwendige Patches enthält. 

$ mkdir Plextor && cd Plextor
$ wget http://nikosapi.org/software/WIS_Go7007/wis-go7007-linux-0.9.8-2.tar.bz2
$ tar xjf wis-go7007-linux-0.9.8-2.tar.bz2
$ cd wis-go7007-linux-0.9.8-2

In den wis-go7007-Quelldateien muss folgende Zeile am Anfang der Datei "Makefile" eingefügt werden, damit der richtige LUM ALSA-Header berücksichtigt wird. 

$ vi kernel/Makefile
EXTRA_CFLAGS += -I /usr/src/linux-headers-lum-2.6.24-24-generic -include sound/config.h

Kompilieren und Installieren. 

$ make

***** Using kernel source in /usr/src/linux-headers-2.6.24-24-generic *****

make modules -C /usr/src/linux-headers-2.6.24-24-generic M=/home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel
make[1]: Betrete Verzeichnis '/usr/src/linux-headers-2.6.24-24-generic'
  CC [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/go7007-v4l2.o
  CC [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/go7007-driver.o
  CC [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/go7007-i2c.o
  CC [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/go7007-fw.o
  LD [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/go7007.o
  CC [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/go7007-usb.o
  CC [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/snd-go7007.o
In Datei, eingefügt von /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/snd-go7007.c:39:
/usr/src/linux-headers-lum-2.6.24-24-generic/sound/driver.h:1:2: Warnung: #warning "This file is deprecated"
In Datei, eingefügt von /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/snd-go7007.c:39:
/usr/src/linux-headers-lum-2.6.24-24-generic/sound/driver.h:1:2: Warnung: #warning "This file is deprecated"
  CC [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-saa7115.o
  CC [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-tw9903.o
  CC [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-uda1342.o
  CC [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-sony-tuner.o
  CC [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-saa7113.o
  CC [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-ov7640.o
  CC [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-tw2804.o
  Building modules, stage 2.
  MODPOST 10 modules
WARNING: "snd_pcm_period_elapsed" [/home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/snd-go7007.ko] undefined!
WARNING: "snd_card_disconnect" [/home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/snd-go7007.ko] undefined!
WARNING: "snd_device_new" [/home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/snd-go7007.ko] undefined!
WARNING: "snd_pcm_set_ops" [/home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/snd-go7007.ko] undefined!
WARNING: "snd_card_free_when_closed" [/home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/snd-go7007.ko] undefined!
WARNING: "snd_pcm_lib_ioctl" [/home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/snd-go7007.ko] undefined!
WARNING: "snd_card_new" [/home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/snd-go7007.ko] undefined!
WARNING: "snd_card_free" [/home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/snd-go7007.ko] undefined!
WARNING: "snd_card_register" [/home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/snd-go7007.ko] undefined!
WARNING: "snd_pcm_new" [/home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/snd-go7007.ko] undefined!
  CC      /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/go7007-usb.mod.o
  LD [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/go7007-usb.ko
  CC      /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/go7007.mod.o
  LD [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/go7007.ko
  CC      /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/snd-go7007.mod.o
  LD [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/snd-go7007.ko
  CC      /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-ov7640.mod.o
  LD [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-ov7640.ko
  CC      /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-saa7113.mod.o
  LD [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-saa7113.ko
  CC      /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-saa7115.mod.o
  LD [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-saa7115.ko
  CC      /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-sony-tuner.mod.o
  LD [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-sony-tuner.ko
  CC      /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-tw2804.mod.o
  LD [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-tw2804.ko
  CC      /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-tw9903.mod.o
  LD [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-tw9903.ko
  CC      /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-uda1342.mod.o
  LD [M]  /home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/kernel/wis-uda1342.ko
make[1]: Verlasse Verzeichnis '/usr/src/linux-headers-2.6.24-24-generic'
sed -e s/@FIRMWARE_DIR@/\\/lib\\/firmware/ \
                        -e s/@FXLOAD@/\\/sbin\\/fxload/ \
                <hotplug/wis-ezusb.in >hotplug/wis-ezusb
sed -e s/@FIRMWARE_DIR@/\\/lib\\/firmware/ \
                        -e s/@FXLOAD@/\\/sbin\\/fxload/ \
                <udev/go7007_firmware_load.in >udev/go7007_firmware_load
sed -e s/@DESTDIR@// <udev/91-wis-ezusb.rules.in >udev/91-wis-ezusb.rules
make -C apps CFLAGS="-I/usr/src/linux-headers-2.6.24-24-generic/include -I../include"
make[1]: Betrete Verzeichnis '/home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/apps'
gcc -Wall -I/usr/src/linux-headers-2.6.24-24-generic/include -I../include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -o gorecord gorecord.c tv-freq.c
gcc -Wall -I/usr/src/linux-headers-2.6.24-24-generic/include -I../include -o modet modet.c -lncurses
make[1]: Verlasse Verzeichnis '/home/mik/backup/hardware/Plextor/wis-go7007-linux-0.9.8-2/apps'

$ sudo make install

Damit fxload die Firmware ins Gerät laden kann, muss usbfs (oder usbdevfs) nach "/proc/bus/usb" eingehängt werden. Dazu muss die Datei "/etc/init.d/mountdevsubfs.sh" angepasst werden. Dafür gibt es einen einfachen Patch, der im neuesten Treiberpaket enthalten ist. 

$ cp /etc/init.d/mountdevsubfs.sh ~/Desktop/
$ cd wis-go7007-linux-0.9.8-2
$ wd=`pwd`; sudo patch -d /etc/init.d -p0 -i "$wd"/patches/mountdevsubfs.sh-usbfs.patch
$ sudo /etc/init.d/mountdevsubfs.sh start

Weblinks

Herausgeber Sprache Webseitentitel Anmerkungen
Von «https://mikiwiki.org/mikiwiki/index.php?title=Plextor_Convertx_PX-M402U&oldid=16751»